revision: august 01, 2011, 16:54 ?2011 littelfuse, inc. specifcations are subject to change without notice. transient voltage suppression diodes 293 surface mount C 3000w > smdj-hr series smdj-hr series agency agency file number e230531 smdj-hr series the smdj-hr high reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. description maximum ratings and thermal characteristics (t a =25 o c unless otherwise noted) agency approvals parameter symbol value unit peak pulse power dissipation at t a =25oc by 10x1000s waveform (fig.1)(note 1), (note 2) p ppm 3000 w power dissipation on infnite heat sink at t a =50 o c p m(av) 6.5 w peak forward surge current, 8.3ms single half sine wave (note 3) i fsm 300 a maximum instantaneous forward voltage at 100a for unidirectional only v f 3.5 v operating junction and storage temperature range t j , t stg -65 to 150 c typical thermal resistance junction to lead r ujl 15 c/w typical thermal resistance junction to ambient r uja 75 c/w notes: 1. non-repetitive current pulse , per fig. 3 and derated above t a = 25 o c per fig. 2. 2. mounted on copper pad area of 0.31x0.31 (8.0 x 8.0mm) to each terminal. 3. measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. tvs devices are ideal for the protection of i/o interfaces, v cc bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. applications features ? halogen-free ? rohs compliant ? for surface mounted applications in order to optimize board space ? low profle package ? built-in strain relief ? typical maximum temperature coeffcient v br = 0.1% x v br @25c x t ? glass passivated chip junction ? 3000w peak pulse power capability at 101000s waveform, repetition rate (duty cycles):0.01% ? fast response time: typically less than 1.0ps from 0v to bv min ? excellent clamping capability ? low incremental surge resistance ? typical i r less than 2a above 12v ? high temperature soldering guaranteed: 260c/40 seconds at terminals ? plastic package has underwriters laboratory flammability 94v-o ? matte tin leadCfree plated rohs
revision: august 01, 2011, 16:54 ?2011 littelfuse, inc. specifcations are subject to change without notice. transient voltage suppression diodes 294 surface mount C 3000w > smdj-hr series smdj-hr series electrical characteristics part number (uni) part number (bi) marking reverse stand off voltage v r (volts) breakdown voltage v br (volts) @ i t test current i t (ma) maximum clamping voltage v c @ i pp (v) maximum peak pulse current i pp (a) maximum reverse leakage i r @ v r (a) agency approval uni bi min max *smdj5.0a-hr * smdj5.0ca-hr rde dde 5.0 6.40 7. 0 0 10 9.2 326.1 800 x *smdj6.0a-hr smdj6.0ca-hr rdg ddg 6.0 6.67 7.37 10 10.3 291.3 800 x *smdj6.5a-hr * smdj6.5ca-hr rdk ddk 6.5 7.22 7.98 10 11. 2 267.9 500 x *smdj7.0a-hr * smdj7.0ca-hr pdm ddm 7. 0 7.78 8.60 10 12.0 250.0 200 x *smdj7.5a-hr * smdj7.5ca-hr pdp ddp 7. 5 8.33 9.21 1 12.9 232.6 100 x *smdj8.0a-hr * smdj8.0ca-hr pdr ddr 8.0 8.89 9.83 1 13.6 220.6 50 x *smdj8.5a-hr * smdj8.5ca-hr pdt ddt 8.5 9.44 10.40 1 14.4 208.3 20 x *smdj9.0a-hr smdj9.0ca-hr pdv ddv 9.0 10.00 11. 10 1 15.4 194.8 10 x *smdj10a-hr * smdj10ca-hr pdx ddx 10.0 11. 10 12.30 1 1 7. 0 176.5 5 x *smdj11a-hr * smdj11ca-hr pdz ddz 11. 0 12.20 13.50 1 18.2 164.8 2 x *smdj12a-hr smdj12ca-hr pee dee 12.0 13.30 14.70 1 19.9 150.8 2 x *smdj13a-hr * smdj13ca-hr peg deg 13.0 14.40 15.90 1 21.5 139.5 2 x *smdj14a-hr * smdj14ca-hr pek dek 14.0 15.60 17.20 1 23.2 129.3 2 x *smdj15a-hr smdj15ca-hr pem dem 15.0 16.70 18.50 1 24.4 123.0 2 x *smdj16a-hr * smdj16ca-hr pep dep 16.0 17.80 19.70 1 26.0 115.4 2 x *smdj17a-hr * smdj17ca-hr per der 1 7. 0 18.90 20.90 1 27.6 108.7 2 x *smdj18a-hr smdj18ca-hr pet det 18.0 20.00 22.10 1 29.2 102.7 2 x *smdj20a-hr * smdj20ca-hr pev dev 20.0 22.20 24.50 1 32.4 92.6 2 x *smdj22a-hr * smdj22ca-hr pex dex 22.0 24.40 26.90 1 35.5 84.5 2 x *smdj24a-hr * smdj24ca-hr pez dez 24.0 26.70 29.50 1 38.9 77.1 2 x *smdj26a-hr * smdj26ca-hr pfe dfe 26.0 28.90 31.90 1 42.1 71.3 2 x *smdj28a-hr * smdj28ca-hr pfg dfg 28.0 31.10 34.40 1 45.4 66.1 2 x smdj30a-hr * smdj30ca-hr pfk dfk 30.0 33.30 36.80 1 48.4 62.0 2 x *smdj33a-hr * smdj33ca-hr pfm dfm 33.0 36.70 40.60 1 53.3 56.3 2 x *smdj36a-hr smdj36ca-hr pfp dfp 36.0 40.00 44.20 1 58.1 51.6 2 x *smdj40a-hr smdj40ca-hr pfr dfr 40.0 44.40 49.10 1 64.5 46.5 2 x *smdj43a-hr * smdj43ca-hr pft dft 43.0 47.80 52.80 1 69.4 43.2 2 x *smdj45a-hr * smdj45ca-hr pfv dfv 45.0 50.00 55.30 1 72.7 41.3 2 x *smdj48a-hr * smdj48ca-hr pfx dfx 48.0 53.30 58.90 1 77.4 38.8 2 x *smdj51a-hr smdj51ca-hr pfz dfz 51.0 56.70 62.70 1 82.4 36.4 2 x SMDJ54A-HR * smdj54ca-hr rge dge 54.0 60.00 66.30 1 87.1 34.4 2 x *smdj58a-hr smdj58ca-hr pgg dgg 58.0 64.40 71.20 1 93.6 32.1 2 x *smdj60a-hr - pgk - 60.0 66.70 73.70 1 96.8 31.0 2 x *smdj64a-hr - pgm - 64.0 71.10 78.60 1 103.0 29.1 2 x *smdj70a-hr - pgp - 70.0 77.80 86.00 1 113.0 26.5 2 x *smdj75a-hr - pgr - 75.0 83.30 92.10 1 121.0 24.8 2 x *smdj78a-hr - pgt - 78.0 86.70 95.80 1 126.0 23.8 2 x smdj85a-hr - pgv - 85.0 94.40 104.00 1 137.0 21.9 2 x *smdj90a-hr - pgx - 90.0 100.00 111. 0 0 1 146.0 20.5 2 x *smdj100a-hr - pgz - 100.0 111. 0 0 123.00 1 162.0 18.5 2 x *smdj110a-hr - phe - 110.0 122.00 135.00 1 177.0 16.9 2 x *smdj120a-hr - phg - 120.0 133.00 147.00 1 193.0 15.5 2 x *smdj130a-hr - phk - 130.0 144.00 159.00 1 209.0 14.4 2 x *smdj150a-hr - phm - 150.0 167.00 185.00 1 243.0 12.3 2 x *smdj160a-hr - php - 160.0 178.00 197.00 1 259.0 11. 6 2 x *smdj170a-hr - phr - 170.0 189.00 209.00 1 275.0 10.9 2 x note: 1. for bidirectional type having v r of 10 volts and less, the i r limit is double. 2. 100% high temperature storage life test and refow simulation. 3. 100% htrb(high temperature reverse bias). for unidirectional, 150c/vr/24hours, for bidirectional, 150c/ vr /48hrs(24hours for each direction for bidirectional). 4. parts with * will be available upon request.
revision: august 01, 2011, 16:54 ?2011 littelfuse, inc. specifcations are subject to change without notice. transient voltage suppression diodes 295 surface mount C 3000w > smdj-hr series smdj-hr series ratings and characteristic curves (t a =25c unless otherwise noted) i ppm - p eak p ulse cur rent, % i rsm 0 0 50 10 0 15 0 1. 0 2.0 3.0 4.0 t r =1 0sec p eak v alue i ppm i ppm 2 t j =25c p ulse width(td) is de?ned as the point where the peak cur rent decays to 50% of i ppm 1 0/1 000sec. w aveform as de?ned by r.e.a t d t-t ime (ms) half v alue i ppm ( ) 1 10 100 1000 10000 10000 0 1. 0 10. 01 00.0 1 000.0 cj (p f) v br - reverse breakdown vo ltage (v) bi -d ir ec ti o nal v = ov un i- di re ct io nal @ vr bi -d ir ec ti o nal @ vr un i- di re ct io nal v = ov 0 0. 5 1 1. 5 2 2. 5 3 3. 5 4 4. 5 5 5. 5 6 6. 5 02 55 07 51 00 1251 50 175 p m( av ) , st ead y sa te po wer di ssi pa ti on (w ) t a - ambient t emperature(oc) figure 3 - pulse waveform figure 4 - typical junction capacitance figure 5 - steady state power derating curve 11 0 100 nu mb er of c ycl es at 60 hz 0 50 100 150 200 250 300 350 i fsm - peak forward surge current (a) figure 6 - maximum non-repetitive peak forward surge current uni-directional only 0. 1 1 10 100 1000 0. 001 0. 01 0. 11 p ppm -peak pulse power (kw ) 10 0. 31x0 .3 1" (8 .0 x8 .0 mm) co pper pa d ar ea t d -p ul se wi dt h ( ms) 0 20 40 60 80 100 02 55 07 51 00 125 150 175 pe ak pu l se po wer (p pp ) or current (i pp ) derating in percentage % t j - initial te mp er at ur e (oc) 50 peak pluse power (single pluse) av erage power figure 1 - peak pulse power rating curve figure 2 - peak pulse power
revision: august 01, 2011, 16:54 ?2011 littelfuse, inc. specifcations are subject to change without notice. transient voltage suppression diodes 296 surface mount C 3000w > smdj-hr series smdj-hr series physical specifcations weight 0.007 ounce, 0.21 grams case jedec do214ab. molded plastic body over glass passivated junction polarity color band denotes positive end (cathode) except bidirectional. terminal matte tin-plated leads, solderable per jesd22-b102d dimensions dimensions inches millimeters min max min max a 0.114 0.126 2.900 3.200 b 0.260 0.280 6.600 7. 11 0 c 0.220 0.245 5.590 6.220 d 0.079 0.103 2.060 2.620 e 0.030 0.060 0.760 1.520 f - 0.008 - 0.203 g 0.305 0.320 7.750 8.130 h 0.006 0.012 0.152 0.305 i 0.129 - 3.300 - j 0.094 - 2.400 - k - 0.165 4.200 l 0.094 - 2.400 - environmental specifcations temperature cycle jesd22-a104 pressure cooker jesd 22-a102 high temp. storage jesd22-a103 htrb jesd22-a108 thermal shock jesd22-a106 soldering parameters te mperature (t ) ti me (t) t s(min) t s(max) t l t p t s prehea t t l t p ramp-up critical zone t l to t p ramp-dow n t 25?c to peak 25?c refow condition leadCfree assembly pre heat - temperature min (t s(min) ) 150c - temperature max (t s(max) ) 200c - time (min to max) (t s ) 60 C 180 secs average ramp up rate (liquidus temp (t l ) to peak 3c/second max t s(max) to t l - ramp-up rate 3c/second max refow - temperature (t l ) (liquidus) 217c - time (min to max) (t s ) 60 C 150 seconds peak temperature (t p ) 260 +0/-5 c time within 5c of actual peak temperature (t p ) 20 C 40 seconds ramp-down rate 6c/second max time 25c to peak temperature (t p ) 8 minutes max. do not exceed 280c do-214ab (smc j-bend) dimensions in inches and (millimeters) cathode band b f g h e c d a (all dimensions in mm) i l k j solder p ads
revision: august 01, 2011, 16:54 ?2011 littelfuse, inc. specifcations are subject to change without notice. transient voltage suppression diodes 297 surface mount C 3000w > smdj-hr series smdj-hr series part numbering system packaging part number component package quantity packaging option packaging specifcation smdj xxxxx-hr do-214ab 3000 tape & reel C 16mm/13 tape eia std rs-481 part marking system vo lta ge bi-directional 5% vo lta ge t olerance series smd j -hr xxx ca high reliability f xxx mark ing c ode littelfuse l ogo cathode band xxxxx date c ode
|
